13
3. Press the “ “ or “ “ buttons to calibrate the pressure higher or lower.
4. Press the “ ” button to confirm the calibration adjustment.
Note: The “ ” icon will remain illuminated next to the calibrated value.
After 20 seconds of inactivity, the display will save your adjustments and exit
calibration mode. Note: Calibration will be erased if the display is reset or if
batteries are removed and the power adapter is unplugged
To exit manual pressure mode and return to auto mode press and hold the
“ “ button for at least 10 seconds.
Replace Intelli-Time Battery
Remove small screw to gain access to
the Intelli-Time battery compartment.
Install battery with “+” positive
terminal facing OUT.
This device comes with
a factory installed
“CR2032” coin-cell
battery that powers the
Intelli-Time memory.
If the display unit sits
without power for a long
period of time, the coin-
cell battery may need to
be replaced to ensure
the Intelli-Time feature
functions properly.
CR2032
3V
