© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
BII09104-17 (1805)
5 of 6
12. Slide the transceiver on the antenna bracket as
shown.
13. Attach the bidirectional antenna to the bracket using
the two screws as shown.
14. Plug the bidirectional antenna into the transceiver,
and secure the clip on the harness to the bracket.
ANTENNA
BRACKET
TRANSCEIVER
ANTENNA
BRACKET
BIDIRECTIONAL
ANTENNA
6 mm SCREW (2)
CLIP
15. Locate the mounting point on the vehicle, and attach
the antenna bracket assembly using the two
self-tapping screws.
16. Plug in the green 2-way transceiver connector into
the transceiver unit.
17. Check that all wire harnesses are routed properly
and all connectors are plugged in.
18. Install all removed parts.
19. Connect the negative cable to the battery.
20. Press and hold the audio unit power button for 2
seconds to restore the audio system and navi
system (if equipped) functions.
21. Set the clock on vehicles without navigation.
22. If necessary restore the systems back to normal
operation as described in the service information.
GREEN 2-WAY
TRANSCEIVER
CONNECTOR
BRACKET
ASSEMBLY
PINS (2)
SELF-TAPPING
SCREW (2)
