Acura 2009 TL Navigation System, Руководство пользователя

Страница: 567 / 650

CONTINUED
Install the new bulb in the socket.
Turn it clockwise to lock it in place.
Insert the socket into the light
assembly. Turn it clockwise to
lock it in place.
Test the lights to make sure the
new bulb is working.
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Start the engine. If you are
replacing a driver’s side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger’s side bulb, turn the
steering wheel to the left. Turn off
the engine.
Push the under cover in place and
set the spoiler and inner fender
cover in the original position.
Install the bolts and holding clips,
and lock them in place by pushing
on their center.
Use a flat-tipped screwdriver to
remove the three holding clips
from the inner fender.
6.
7.
8.
9.
2.
1.
Lights
Replacing a Front Fog Light Bulb
Ma
int
e
na
nce
561
HOLDING CLIP COVER
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
０８／０７／２９ １９：１１：２５ ３１ＴＫ４６００ ０５６６