Acura 2009 TL Navigation System, Руководство пользователя

Страница: 80 / 650

If the indicator blinks while driving,
it indicates the differential
temperature is too high.
You will also see a ‘‘SH-AWD DIFF
TEMP. HIGH’’ message on the
multi-information display (see page
).
Pull to the side of the road when it is
safe, shift to Park, and let the engine
idle until the indicator goes out.
Models equipped with the keyless
access system have an engine start/
stop button instead of an ignition
switch. ON Mode is the equivalent of
ON (II). See page
for ignition
switch and power mode comparison.
This indicator normally comes on for
a few seconds when you select the
ON mode by operating the engine
start/stop button (see page
). If
it comes on at any other time, it
indicates that there is a problem with
the system.
This indicator has two functions:
If this indicator comes on along
with a ‘‘CHECK KEYLESS
ACCESS SYSTEM’’ message on
the multi-information display,
there is a problem with the keyless
access system. Have the vheicle
checked by your dealer as soon as
possible. For more information,
see page
.
If this indicator comes on along
with a ‘‘CHECK KEYLESS
STARTING SYSTEM’’ message
on the multi-information display,
there is a problem with the keyless
starting system. In this case, your
vehicle may not restart. If you can
continue to drive safely, take the
vehicle to your dealer and have it
checked as soon as possible. For
more information, see page
.
1.
2.
187
188
188
518
180
On models with keyless access system
Instrument Panel Indicators
Keyless Access System
Indicator
74
Continuing to drive with the SH-AWD
indicator blinking may cause serious
damage to the system.
０８／０７／２９ １７：３３：４９ ３１ＴＫ４６００ ００７９