On Touring Models
You can turn the driving position
memory activation off and on. To
turn it off, press and hold the LOCK
and UNLOCK buttons at the same
time for about one second. The LED
in the remote transmitter will blink
twice. Then release the buttons.
To turn it back on, repeat this
procedure. The LED will come on
for one second to indicate the
feature has been turned on.
Each remote transmitter will also
activate the Driving Position
Memory System (see page
).
When you unlock and open the
driver’s door with the remote
transmitter, you will hear a beep.
The driver’s seat, except power
lumbar, and outside mirrors move to
the positions stored in that memory
location. You will hear two beeps
when the movement is complete.
The driving position memory
activated (Memory 1, Memory 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
If the seat and mirrors are already in
the proper positions, you will hear
three beeps when you open the door.
97
Remote Transmitter
Recalling a Memorized Driving
Position
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
85
Memory 2
Memory 1
