The left and right halves can be
folded up separately.
To get into the third row seats, pull
up the lever on the side of the
passenger’s side second row seat-
back. The seat-back will tilt forward,
and the seat will slide forward.
After you return the seat-back to the
upright position, push the whole seat
backwards until it latches. Make
sure the seat is fully latched before
sitting in it.
To change the seat-back angle of the
seats in the second row, pull up on
the handle on the outside of the seat-
back.
If you are folding the left half of
the seat, use the ignition key to
release the center seat belt from
the detachable anchor. Allow the
seat belt to retract into the roof.
Insert the latch plate into the roof
holder.
Lower the head restraint to its
lowest position.
Pull up the handle on the outside
of the seat-back.
Fold the seat-back forward.
Reverse this procedure to return the
seat to the upright position. Make
sure the seat is locked securely
before driving.
2.
3.
1.
4.
Folding the Second Seat
Adjusting the Second Seat
Third Row Access
Seats
Instruments and Controls
87
HANDLE
RELEASE LEVER
