©
2011 American Honda Motor Co., Inc. - All Rights Reserved.
BII 46119 (1108)
9 of 12
35. Route the back-up sensor harness up along the
vehicle harness, and secure it to the vehicle
harness with five wire ties. Don’t secure the back-
up sensor harness to the SRS harness.
5D28012B
FRONT
WIRE TIE
BACK-UP SENSOR
HARNESS
WIRE
TIE
VEHICLE
HARNESS
VEHICLE
HARNESS
WIRE
TIE
VEHICLE
PANEL
CUSHION
TAPE
Cut in half.
WIRE TIE
Don’t secure it to
the SRS harness.
WIRE
TIE
33. Using isopropyl alcohol, thoroughly clean the
vehicle panel area where the cushion tape will
attach. Secure the back-up sensor harness to the
vehicle panel with one cushion tape.
34. Plug the back-up sensor harness 5-pin connector
into the buzzer 5-pin connector and secure the
buzzer to the screw grommet with the self-tapping
screw and collar.
5D27154B
FRONT
BUZZER
BACK-UP
SENSOR
HARNESS
BACK-UP SENSOR
HARNESS 5-PIN
CONNECTOR
BUZZER 5-PIN
CONNECTOR
SCREW
GROMMET
SELF-
TAPPING
SCREW
COLLAR
VEHICLE
PANEL
CUSHION
TAPE
36. Using isopropyl alcohol, thoroughly clean the
vehicle panel area where the cushion tape will
attach. Using scissors, cut one cushion tape in
half. Secure the back-up sensor harness to the
vehicle panel with half of a cushion tape.
37. Attach the (2A) fuse label to the back-up sensor
harness fuse case.
5D28022B
FUSE LABEL
(2A)
FUSE CASE
BACK-UP SENSOR
HARNESS
BACK-UP SENSOR
HARNESS
FRONT
