Acuity Brands NLIGHT nDTC Скачать руководство пользователя страница 31

Страница: 31 / 35

Figure 26 - Workflow to adjust Date, Time and location for the nDTC

Change Access PIN

Changing access PIN is available on the nDTC through the Settings section of the hamburger menu. By perfoming

this action, the administrator PIN will automatically be replaced with the new entered PIN.

Figure 27 - Change Admin PIN workflow

Factory Reset

The nDTC allows on-screen factory reset, through the Settings screen, as well as reset through SensorView. The

on-screen factory reset can be triggered using the following workflow. Upon selection, users will be prompted to

confirm factory reset action. If confirmed, the device will enter factory reset and all previously stored data will be set

deleted.

Figure 28 - Factory reset

Technician Mode

The nDTC has been designed to serve the purpose of being used to fully configure and control a lighting control

zone without the use a controller, or SensorView. To effectively drive this, the Technician Mode has been equipped with

a wide set of on-screen features, such as programming of channels, input/output devices, event logs, and more.

Содержание NLIGHT nDTC




































Результаты поиска

Содержание NLIGHT nDTC

Отзывы:

Похожие инструкции для NLIGHT nDTC

Бренды по названию

Популярные бренды

Acuity Brands NLIGHT nDTC, Руководство пользователя

Результаты поиска

Содержание NLIGHT nDTC

Отзывы:

Похожие инструкции для NLIGHT nDTC

Бренды по названию

Популярные бренды