Acuity Brands | One Lithonia Way Conyers, GA 30012 | Phone: 800.535.2465 | www.nlightcontrols.com | © 2020 Acuity Brands Lighting, Inc. | All rights reserved. | Rev. 09/17/2020
The End time determines when the schedule’s End
Trigger will execute. End times can be either set times,
or astronomical.
1.
Set Time – A defined time based on hours,
minutes and AM/PM
2.
Astronomical Time – A defined time based on
Sunrise or Sunset with selected offset
Actions screen allow configuration of what will execute
as part of the End Trigger. Available actions include:
1.
Do Nothing – Maintains current state of nLight
light devices in the spaces (inputs and outputs).
2.
Revert to Defaults – Commands all nLight
devices in network to revert to their default
settings.
3.
Set Light Levels - Enables configuration of
channels, or output devices, to be controlled by
the Trigger.
4.
Enable/Disable Switches - Enables, or disables,
wall switches from being used.
5.
Enable/Disable Sensors - Enables, or disables,
sensors from being used.
Screen enables configuration of channels, or output
devices, to be controlled by the Trigger. A Trigger can
only control either Channels or Outputs.
1.
Channel/Device configuration section – Used to
enable the channels, or devices, to be controlled
by the Trigger.
o
Toggle button - Enabling will result
channel/device being controlled by this
Trigger.
o
Slider – Used to set the light level of the
channel/device.
2.
Channels Tab – Used to configure channels to be
associated to the Trigger.
o
Navigating out of this tab will result in
loss of configuration.
3.
Outputs Tab – Used to configure devices to be
associated with the Trigger.
o
Navigating out of this tab will result in
loss of configuration.
4.
Master Controller – Used to set light level of all
associated channels, or devices.
Содержание NLIGHT nDTC
Страница 1: ...NLIGHT DIGITAL TIME CLOCK USER MANUAL 2 4...