17
9. How to adjust the sensors
A
B
The sensor switch for the CLOSED position is set at the factory, but may need ad-
justment depending on the header size and turnbuckle length.
Note: to gain acces to the Close switch, the track trim can be slid on the track to
gain access.
1.
Disengage motor.
Close
the door fully by hand.
2.
Set the sensor (A) sideways to
match the cable slider (B). Both screw
heads should be in line, see picture
The cable slider holds a magnet.
DoorLIFT DL
-
6
Remote door system
Owner
’
s manual
