ActSafe PME, Руководство пользователя

Страница: 25 / 32

25
ENGINE WARRANTY
Act Safe Systems AB is pleased to assume warranty obligations and apologies for the trouble caused
to you. All authorised dealers are also entitled carry out warranty repairs. In most cases it only
concerns routine repairs, however, sometimes warranty claims are not justified. For instance,
warranty is deemed void if engine defects are caused by misuse, incorrect maintenance, transport,
handling, storage or installation. Apart from that, warranty is considered void if the engine’s serial
number has been removed or the engine has been modified.
If the customer does not accept a decision of an authorised dealer an investigation shall be carried
out to determine whether the warranty services should be provided. Please ask your dealer to submit
all necessary information to his wholesale dealer or the factory. If the wholesale dealer or the factory
decides that the claim is justified all defect parts will be fully replaced under the warranty. In order to
avoid misunderstandings between customers and dealers some causes for engine defects are
presented below which are not covered by warranty.
Insufficient maintenance:
Service life of an engine depends on conditions where the engine is used in as well as on its
maintenance. Some machines are often used in dust or dirt, which causes symptoms that are similar
to premature wear. Such wear and tear caused by penetration of dirt, dust, spark plug cleaning
agents or other scrubbing materials into engine due to insufficient maintenance shall not be covered
by warranty.
This warranty shall cover material and/or workmanship defects of the engine.
Additionally, warranty conditions shall not be applied to repairs that are caused by
following reasons:
-
Parts that are not original Act Safe Systems AB parts.
-
Loose carburettor, blocked fuel lines, blocking valves or other defects caused by use of
contaminated or old fuel. (Use clean, fresh unleaded petrol).
-
Defects or wear of parts through dirt, insufficient air filer maintenance, incorrect remounting.
See „Instruction of use“.
-
Routine settings of the engine.
Warranty services shall be carried out by Act Safe Systems AB contractual dealers only.