ActronAir LM24-2G, Руководство по эксплуатации

Страница: 12 / 28

Operation Manual
LM7/24-2 Wall Controller
Operation Manual LM7-2 / LM24-2 Wall Controller
Document No. 0525-079 Ver. 1 190821
Page 12
08.05. Auto Operation (LM7-2)
NOTE
Automatically changes between heating and cooling mode.
1. Press the Button.
2. Press the Button until
AUTO
appears on the display.
3. Set the desired temperature by pressing either the or Buttons.
• Maximum temperature setting 30.
• Minimum temperature setting 16.
• For a WARMER room temperature, press the
Button.
• For a COOLER room temperature, press the Button.
4. Adjust the desired fan speed by pressing the Button. When your air conditioner is turned On the indoor
fan can run continuously and is indicated by the CONT indicator. This is generally preferred during the cooling
mode to ensure maximum air circulation. However, during the heating mode this can create the effect of cool
drafts. It then would be preferable to have the indoor fan, cycle On and Off automatically with the Outdoor Unit.
This is selected by pressing the
Button until the CONT indicator is Off.
5. Press the Button again. The system will retain your last setting until next operation.
08.06. Fan only operation (LM7-2)
NOTE
The system’s status must be of to set Fan mode.
1. Press the Button.
2. Adjust the
FAN
speed by pressing the Button .
3. To turn Off the fan operation, press the Button again.