background image

Features:
•   Low level O

3

 production: 

0.04 ppm maximum.

•   Replaceable ActivePure® Cell.

Electrical:
•  120v 60Hz AC
•  15 watts power consumption.

Mechanical:
•  Distribution via air handler.

Size:
•   Dimensions: 6” x 6” x 11.25” 

(15 cm x 15 cm x 28.5 cm.)

•  Weight: 3 pounds (1.2 kg.)

Coverage:
•   Covers up to 2000 ft

2

 (186 m

2

).

Warranty:
•  Length of warranty will vary 

depending on model.

SPECIFIC

A

TIONS

 

  

To reduce the risk of electric shock, this equipment may have a grounding type plug 

that has a third (grounding) pin. This plug will only fit into a grounding type power 

outlet. If the plug does not fit into the outlet, contact qualified personnel to install the 

proper outlet. Do not alter the plug in any way.

Location for Protective Earth Line.

ABOUT DUCTWORX

activTek DuctwoRx is easily mounted into 
the supply side of air conditioning and 
heating system air ducts where many 
problems can start. 

Optional ozone-free ActivePure cells

Optional ozone-free units are available with 
the same basic components as standard 
DuctwoRx units and include an ozone-free 
bulb. 

Odor reduction

Note that odor reduction is dependent on 
low level ozone. The standard DuctwoRx 
products provide 0.04 ppm or less of ozone. 
If odor reduction is required, the standard 
ActivePure® Cell is recommended.

4

WARNING! - UV Light in operation. Disconnect unit from power supply 

before servicing. Failure to follow warnings may result in severe eye 

damage.

Содержание DUCTWORX

















Отзывы: