10
MAINTENANCE / UV BULB INDICATOR
Your ActivePure
®
Induct Guardian IV unit requires no periodic maintenance
beyond normal replacement of the ActivePure Cell every one (1) year .
The UV Bulb Indicator on the face of the unit will glow when the UV bulb is in
use . If the indicator does not glow and the unit has power, the ActivePure Cell
should be replaced .
NOTE:
For optimal performance and to maintain the Limited 5 year warranty,
it is required to replace the ActivePure
®
Cell every year, even if the
UV bulb appears to be operating normally .
C
UV Bulb
Indicator
CHANGING THE ACTIVPURE
®
CELL
•
UV Light in operation; disconnect unit from power supply before
servicing; failure to follow warnings may result in severe eye damage
•
If the unit is hard wired, be sure the power to the unit is off; always
follow OHSA electrical lockout safety requirements to prevent
accidental release of energy during service or maintenance activities
WARNING
1 . Disconnect (unplug)
power cord from unit .
UV Lam
p in ope
ration w
hen lit.
Lampe
UV en
marche
lorsque
le voya
nt est a
llumé.
HVAC E
NVIRO
NMEN
TAL CO
NDITIO
NING S
YSTEM
SYSTÈ
ME DE
COND
ITIONN
EMEN
T D’AIR
CVC
2 . Remove the ActivePure
®
Induct Guardian IV
assembly by removing
the eight (8) nuts and
sliding the unit out .
UV Lam
p in opera
tion whe
n lit.
Lampe U
V en mar
che lorsq
ue le voy
ant est a
llumé.
HVAC EN
VIRONM
ENTAL C
ONDITIO
NING SY
STEM
SYSTÈM
E DE CO
NDITION
NEMEN
T D’AIR C
VC
3 . Remove the six (6) nuts
holding the cell assembly
to remove the cell from the
ballast assembly .