7
3.
Always operate spa with sufficient water. Water level must be
above filter. Insufficient water will cause pump failure and void
warranty.
4.
Maintain proper water PH (7.4 - 7.6 is ideal). Failure to do so
may cause damage to vinyl liner, pump seals, heater element, and
damage will not be covered by warranty.
5.
Install spa only on floors or areas that can withstand repeated
water exposure. Equipment failure as well as splashing, filling and
draining will spill water. If located in a multi-story building, care
must be taken to protect the objects on the floors below.
6.
Install only on floors that can withstand the floor loading of your
spa. If in doubt, please consult an architect or engineer to determine
the floor rating before filing. See specifications.
7.
Do not open Power Pack or the GFCI. Opening either component
will void the warranty.
8.
When storing, always drain all water from tub, plumbing and
Power Pack, especially in freezing temperature as freeze damage is
not covered by warranty.
9.
Always maintain proper water sanitation with chemicals and routine
cleaning. Warm water is an ideal place for bacteria to thrive. It’s
your sole responsibility to maintain proper water sanitation. Read
the sections on water chemistry and filter maintenance.
10.
Never add water to chemicals. Always add chemicals to water to
avoid strong fumes or violent reactions that may result in hazardous
chemical spray.
SAVE THESE INSTRUCTIONS
.
