User’s Guide
12
SPA ASSEMBLY
1.
Take all parts out of the box. Compare items with package contents
diagram on previous page
2.
Start with the panel that has 3 large
holes - hold with arrow pointing up
and arrow on the inside spa wall.
Locate this panel so you have enough
room to attach power pack to spa
liner.
Pick up a plastic extrusion corner
piece and slide it onto panel. The
snap and lock should be towards
the top, as shown in the diagram at
right.
Take another panel and slide it into
the receiving plastic extrusion you
placed on the first panel.
Take another plastic extrusion corner
piece and slide it into the grooves of
the second panel.
Continue panel assembly by
alternating plastic corner extrusions
and panels until spa structure is
complete.
HINT: If panels don’t slide easily into
extrusions, you may wipe common
cooking oil on grooves to allow them
to slide easier.
Lock
Snap
Slide the
corner piece
down onto the
first panel.
