User’s Guide
20
Turbo Operation
To turn the turbo wave pump on or off, push the on/off button. Look
to see if the spa blows bubbles uniformly all the way around the spa.
The turbo wave pump will automatically shut off after 15 minutes of
operation.
When the turbo wave blower system is activated, the blower pump
is pumping outside ambient air into the spa, creating much of the
action in the spa. Some cooling of the water will occur as the turbo
wave blower operates. This is normal and the heater will recover
lost temperature after use. Remember, at elevated temperatures, 15
minutes soaking time is considered safe.
The spa power pack contains a filter to help keep the water in the spa
clean. If the filter becomes dirty or clogged, water flow through the
power pack will be restricted. This may prevent the spa from heating
up. Refer to the Maintenance section of this manual for information
on checking and cleaning the filter.
Cover
After use, place the cover on the spa. Lock the plastic clips in eight
locations on the outside of the spa.
Always leave the cover locked and in place when the spa
is not in use. The cover is not a replacement for adult
supervision. Always supervise young children in and
around water.
NOTE: The cover must be in place for the spa to heat up.
