For service assistance, please call your authorized ActiveCare dealer.
Prowler 3310/3410 Owner’s Manual
8
Operation
CONTROL PANEL
1. Headlight/Rear Light Button
2. Speed
Dial
3. Hazard Light Button
4. Battery
Indicator
5. Horn
Button
6. Turn Signal Button
7. Throttle
Lever
8. Key
Switch
POWER SWITCH
Turn the key switch to power ON or OFF
FORWARD AND REVERSE
1. Push the throttle lever forward with your right thumb and the scooter will move forward.
2. Push the throttle lever forward with your left thumb and the scooter will move backward.
3. The horn will beep when the scooter is in reverse.
DRIVING SPEED
The driving speed of the scooter is set via the speed control knob located on the control panel.
When the knob is turned to a position, the scooter will drive only at the speed indicated by the
knob. The scooter will travel faster the farther the knob is turned clockwise. To reduce the
scooter’s travel speed, turn the knob back counter-clockwise.
BRAKING & STOPPING
To activate the electromagnetic brake, release the throttle lever completely. The brake will be
activated and the scooter will come to a stop. When parking, park only on a flat surface and
turn the key switch to [OFF]. Then pull out the key (only after stopping).
◊
Caution
Stopping distance will vary with your forward/reverse speed. Please begin braking as
early as possible. When parking your scooter, be sure to park on a flat ground and
then turn the power to “OFF”.
HEADLIGHT/TAILLIGHT BUTTON
The headlight button is an independent switch. So, if you drive your scooter with the headlight
on, remember to turn off the headlight at the same time you turn off the power switch to save
the battery power.
