12
Mid-size Scooter Series
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your scooter. They are bolted to the
frame at the rear of the scooter.
PROHIBITED! Do not remove the anti-tip wheels or modify your scooter in any way that
is not authorized by your Provider.
WARNING! The anti-tip wheels may cause interference with the smooth transition of your
scooter when ascending or descending a curb. Contact your authorized
Provider for more
information.
Batteries
The batteries store electrical energy that powers your scooter. See III. “Batteries and Charging ” for
information on how to charge your scooter batteries.
Safety Flag Bracket (Optional)
An accessory bracket for installing an optional safety flag is mounted near each anti-tip wheel.
See
figure 4.
To install the flag, the supplied L-shaped hex key is needed.
To install the safety flag:
1. Remove the cap from the top of the bracket.
2. Loosen the setscrew with the supplied L-shaped hex key.
3. Insert the flag pole into the opening.
4. Tighten the setscrew to complete installation.
I I . Y O U R S C O O T E R
Main Circuit Breaker (Reset Button)
When the voltage in the batteries becomes low or your
scooter is heavily strained because of excessive loads, the
main circuit breaker may trip to protect the motor and
electronics from damage. When the breaker trips, the entire
electrical system shuts down.
See figure 5
.
The reset button pops out when the breaker trips.
Allow a minute or so for the electronics to “rest.”
Push in the reset button to reset the breaker.
If the breaker trips frequently, you may need to charge
the batteries more often or have your authorized
Provider perform a load test on the batteries.
If the main circuit breaker trips repeatedly, see your
authorized Provider for service.
Figure 5. Main Circuit Breaker (Reset Button)
