User Manual
–
Ray-On PoE series
14
sur
22
DOP1066_A
•
In the Device tab, you can rename the enclosure if necessary in DANTE CONTROLLER.
You can change the sample rate to subscribe to another device. Two connected devices
must have the same sample rate.
•
In the Network Config tab, it is recommended to remain in auto IP except installation
requiring fixed IP.
Speaker setting
The DSP processor built into the Ray-On PoE enclosure incorporates EQ settings for optimal sound quality.
Once the rooting is done in DANTE CONTROLLER no other action is necessary to operate Ray-On PoE.
If room equalization is reguired, this will be done on the DANTE matrix or on the mixing console connected
to the DANTE network.
