User Manual
–
Ray-On PoE series
9
sur
22
DOP1066_A
•
PoE+ injectors
In the case where switches that do not have the PoE+ function are already present on the
installation, it is possible to position a PoE injector between the switch and the cable
connected to the enclosure. This device allows power to be sent over the network link without
changing the topology or routing properties of the existing network. Ray-On PoE speakers
must be connected to PoE+ type injectors (IEEE802.3at).
4.
Wiring
Figure 6 :
Wiring Ray-On PoE columns
POWER SUPPLY