INSTRUCTIONS
17
4. Fill the reservoir with clean water and a flushing agent formulated to remove salt deposits and
excess nutrients from the plants’ root systems and grow medium (available at most indoor
gardening and hydroponic retailers). Note: Using a flushing agent is completely optional. Pump
away and discard flushing agent after cleaning. Pump clean water through the reservoir, chiller
and hydroponic system to flush out the flushing agent solution if needed (Fig. 5 & 6).
5. Regular cleaning of the chiller’s front and side air filter panels will help maintain and maximize the
chiller’s efficiency (Fig, 2). Follow the steps below to remove and clean the air filters.
1) LOOSEN SCREW ON FRONT PANEL
2) GENTLY REMOVE FRONT PANEL
3) PUSH FILTER UPWARD TO
UNLOCK IT FROM THE UNIT
4) REMOVE FILTER FROM FRONT PANEL
5)
LIFT AND REMOVE SIDE PANEL
6)
LOOSEN SCREEN ON SIDE PANEL
7)
REMOVE FILTER FROM SIDE PANEL
8)
USE WATER AND GENTLE BRUSHING TO
WASH THE FRONT AND SIDE FILTERS
AACH10_25_50_100_Instructions_8.1.2018.indd 17
2018/8/2 13:53
