Activa SmartMop, Руководство пользователя

Страница: 6 / 14

4
4
5
5
9. Once the charging cycle is completed ( the green LED (8)
fully lights up
)
, remove the plug (2) on the battery charger
from the mains socket (Flg.6).
ATTENTION:
to prevent any damage to the mains socket,
pull directly on the plug (not on the cable) when taking it out.
10. Take the power cable plug (6) out of the socket (7) on the
battery.
11. Insert the cap (5) that covers the battery power socket.
PREPARING THE APPLIANCE
1. Take the package to the dedicated maintenance area.
2. Remove the appliance and all the accessories from the box.
3. Insert the lower tube (1) of the control handlebar in the hole
on the joint (2) (Flg.1).
4. Fix the handlebar to the joint using the screw and nut (3),
making sure the hole on the handlebar coincides with the
hole on the joint (Fig.2).
ATTENTION:
the screwdriver is not supplied.
5. Block the handlebar in the horizontal position . Rest your
foot on the main part of the appliance to prevent it from
tilting, then push the handle away from you until it snaps
into the horizontal pOSition (Fig.3).
ATTENTION:
do not rest your foot on the main switch.
6. Rotate the stop lever of the handlebar (4) in the direction
of the arrow (Fig.4).
8. Rotate the stop lever of the handlebar (4) in the direction
of the arrow (Fig.6).
7. Close the command handlebar, pushing the handle ( 5 )
towards the main part of the appliance(Fig.5).
9. Insert the battery (6) in the battery-holder compartment(7)
in the rear part of the appliance (Fig.7) . Push the battery
until the uncoupling lever (8) locks into place.
6
7
7
8
4
6
CLICK
3
3
3
2
1
2
1
!
!