Activa SmartMop, Руководство пользователя

Страница: 4 / 14

OFF
1
1 2
3
2
3 4
CLICK
4
7
HOW TO UNPACK THE APPLIANCE
The procedure for removing the device from its packaging is the
following:
1. Place the lower part of the outer packaging in contact with the floor.
ATTENTION: use the pictograms printed on the box as a
reference.
2. Open the outer box.
3. Remove the accessories from the box and carefully lay them on
the ground.
4. Take the appliance out of the box.
ATTENTION: it is recommended that all the packaging
components be kept for any future transportation of the
appliance.
ATTENTION: these operations must be carried out using
protective gloves to avoid any possible contact with the
edgesor tips of metal objects.
HOW TO TRANSPORT THE APPLIANCE
The procedure for the safe handling of the device is the following:
1. If the appliance is working ,tum it off via the main switch(1)
(Fig. 1).
2. Make sure the recovery tank is empty . If it isn't , empty
itcompletely.
3. Make sure the solution tank is empty . If it isn't , empty it
completely.
4. Remove the power battery (2) from the appliance . To free the
battery, shift the stop lever (3) in the direction of the arrow
(Fig.2).
7. Rotate the stop l ever of the command handlebar (4) in the
direction of the arrow (Fig.5).
8. Close the command handlebar, pushing the handle (5) towards
the main part of the appliance (Fig.6).
9. Rotate the stop lever of the command handlebar (4) in the
direction of the arrow (Fig.7).
10. To raise the device off the floor, use the handle (6) on its rear
(Flg.8).
5. Remove the battery from the appliance using the handle
moulded on it (Fig.3).
6. Block the handlebar in the horizontal position . Rest your foot
on the main part of the appliance to prevent it from tilting, then
push the handle away from you until it snaps into the horizontal
position (Fig.4).
ATTENTION:
do not rest your foot on the main switch.
ATTENTION:
when transporting the appliance on vehicles,
secure it frmly in place in accordance with the directives in
force so that it cannot slide or tip over.
ATTENTION: these operations must be carried out using
protective gloves to avoid any possible contact with the
edges or tips of metal objects.
5
6
4
5
!
!
!
!
8
6