![Activa SmartMop Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/activa/smartmop/smartmop_user-manual_2843543005.webp)
7
6
5
8
6
BATTERY TYPE
To power the appliance, use only t he battery supplied in the
package or by a specialised technician.
OTHER BATTERY TYPES CANNOT BE USED.
The appliance is powered by a lithium-ion battery. The battery
compartment can accommodate a single battery slot at 24V.
ATTENTION:
for the maintenance and disposal of the
battery read the document supplied by the battery
manufacturer.
RECHARGING THE BATTERY
The battery must be charged prior to the first use, and when it
doesn't provide enough power for tasks that could formerly be
performedwithout difficulty. To recharge the battery, proceed as
follows:
1. Take the appliance to the dedicated battery recharging area.
ATTENTION:
the room where the batteries are recharged
must be adequately ventilated to prevent the accumulation
of gases that leak from batteries.
2. If the appliance is working, turn it off via the main switch (1)
(Fig. 1).
3. Block the handlebar in the vertical position.
ATTENTION:
during this operation, do not rest your foot
on the appliance .
before inserting the power plug (2) in the power supply unit (3)
(Fig.2).
ATTENTION:
before connecting the battery charger to
the socket, make sure the characteristics of the mains ,
supply correspond to those of the battery charger.
ATTENTION:
the battery charger must only be used in a
covered place.
5. Connect the power plug (2) to the mains supply.
ATTENTION:
make sure the green LED (4) on the
battery charger lights up when you enable the battery
charger base circuit(Fig.3). This LED indicates that the
charger circuit is correctly powered.
4. Read the battery charger manual (supplied with the device)
6. Remove the cap (3) covering the battery power socket (Fig.3).
7. Insert the battery charger power cable plug (6) in the socket (7)
on the battery (Flg.5).
ATTENTION:
make sure the green LED (4) on the battery
charger lights up when you enable the charger (Fig.3). This
LED indicates thai the charger circuit is correctly powered.
ATTENTION:
before inserting the plug (6) in the socket (7),
make sure the battery charger housing compartment is not
dirty (dust, condensation or other types of liquid) .
ATTENTION:
make sure the red LED (4) on the battery
charger lights up when you insert the plug (6) in the
socket (7). This LED Indicates that the battery is
recharging.
8. Perform a complete battery charging cycle.
ATTENTION:
the red LED (4) remains on until the battery is
fully charged. When the recharging cycle has ended,the red
LED goes off and the green LED comes on.
ATTENTION:
the charger and the battery can be left
connected to the power socket. The red LED (4) light up
when the charger occasionally tops up the battery.
ATTENTION:
the red charge status LED (4) does not
provide any indication of the battery charge level.
ATTENTION:
during the charging phase , the battery
may overheat. This is normal and does not mean there
is any problem with the battery.
ATTENTION:
if the battery used in this appliance is
overcharged , there may be a risk of fire, explosion or
chemical bums.
OFF
1
1
!
!
!
!
!
!
!
!
!
!
2
2
3
4
3
5
4
Содержание SmartMop
Страница 1: ...User Manual Activa SmartMop ...
Страница 14: ......