ACTiSYS Corp.
USB-IR Dongle Installation Manual
Release V1.42
36
ACTiSYS Corporation 2001 All Rights Reserved
PRECAUTIONS
To ensure trouble-free operation, please observe the following precautions:
Optical communications are easily affected by external light sources, weak batteries,
transfer distance, transfer angle, etc. Any of these conditions may cause a data transfer
failure, incomplete, missing or incorrect data. Make sure that the wireless interface is
away from direct sunlight and other strong light source.
l
Do not terminate arbitrarily during file transfer process between DUT and computers
until finished. Otherwise DUT internal data integrity may be damaged, which is due
to the violation of DUT’s.
l
Do not expose the unit to moisture, as this will damage the internal circuitry.
l
Do not expose the unit to extreme temperatures. It should not be placed in direct sunlight or
in a closed vehicle, neither should it be placed near heaters nor other heat sources.
l
Do not store the unit in a humid or dusty place.
l
Use a soft, dry cloth to clean the unit. Do not use a wet cloth or any solvent.
l
Do not drop the unit or handle the unit carelessly.
CAUTION:
l
Never touch the pins of computer connection terminal. The internal circuits can be
damaged by a static Electricity discharge. If this device requires any servicing, use only an
ACTiSYS service dealer, an ACTiSYS approved service facility, or an ACTiSYS repair
service.
l
When exchanging data with host computer, be sure the appropriate serial communication
port is available and is not in conflict with other peripheral device or software.
