59
Note
:
l
Currently, only certificates in the
“
.pem
”
format are supported, and the certificates must
be generated using the
“
DER encoded binary X.509
”
method.
l
The length of the certificate file name must not exceed 64 bytes, and the file size must
be less than 100 KB.
l
All the three certificates are required for authentication.
l
You must select the right certificate file for each type of certificate.
3. Click the
Connect
button, and then the adapter will connect to the wireless router (AP).
Note:
l
Connect the CMS WLAN Adapter to your network when the receiver is in
Ready to
Connect
state.
l
The CMS WLAN Adapter may take some time to connect to your network, depending
on your network environment.
5.3.30.
Setting up the Receiver
’
s IP Address
Follow the procedure below to set up the receiver
’
s IP address:
1. Go to the
Remote Management
tab page by clicking the
Remote Management
tab.
2. Go to the
TCP/IP Setting
section, and set the
IP Assignment
to
Auto
or
Static
.
l
Auto
: The receiver will be assigned an IP address by the DHCP server.
l
Static
: You can define the IP address, subnet mask, and default gateway for the
receiver. If you select
Static
, you can define a DNS server.
3. Click the
Apply
button, and then click
OK
on the pop-up message box to confirm.
