24
Part V. Device Management for IT
Administrator
ScreenBeam Pro provides a local management web server to manage the device. With the
web server, IT administrators can setup, configure and upgrade the receiver.
5.1. Log into the Local Management Web Server
There are two situations: when autonomous GO is enabled and when it is disabled.
5.1.1. When Autonomous GO is Enabled
When
Autonomous GO
is enabled, you can log into the local management web server
through "
". You must connect your device to the receiver, and then
access the URL address with a web browser.
Note
:
is the default URL address. You can modify this URL address in
the local management web page. Refer to Section 5.3.25.
Setting up P2P Network
Parameters
for detail.
Follow the procedure below to log into the local management server when AGO is enabled.
1. Connect your device to ScreenBeam Pro.
2. Access the URL address (
) with a web browser on your device.
You may see the security warning page, as shown below. This site is safe, please continue.
