8
2.4.2. Connecting the IR Receiver Extension Cable
The IR Receiver Extension Cable receives signals from the source device remote control
and sends them back to the source device.
1. Get the IR Receiver Extension Cable from the MyWirelessTV kit. The IR Receiver
Extension Cable has a green connector.
2. Plug the IR Receiver Extension Cable's green connector into the green
IR Ext
port on
the back of the Receiver.
3. Remove the protective covering of the double-stick tape and attach the flat end of the IR
Receiver Extension Cable to the front corner of the HDTV monitor's bezel or frame.
You should now be able to use the remote control of the source device from the location of
the HDTV monitor to which you are streaming content.
Note
: The use of the IR Receiver Extension Cable is optional. You can use this cable when
the receiver is mounted behind a TV or hidden away from line-of-sight of the remote control.
