ActionTec 56K Internal PC Modem, Руководство пользователя

Страница: 41 / 57

41
Configuring Your Modem’s Country Code
After following the steps for your operating system and after the system has restarted,
you may need to issue an AT command to configure the modem to use the Public
Switched Telephone Network (PSTN) of your country. The modem can be config-
ured for Canada, Japan, and the United States.
To configure the modem’s country setting, open a terminal program, such as Hyper-
Terminal. At the command prompt, type:
at
Press ENTER. The response should be “OK”. Now type one of the following com-
mands depending on the country where the modem will be operated.
Canada:
at%T19,0,1
Japan:
at%T19,0,10
United States:
at%T19,0,19
After typing the appropriate command, press ENTER. If the command was properly
entered, the response will be “OK”. If you recieve a response of “ERROR” check the
command above a second time, and enter it again. After the command has been
entered and accepted, the modem will default to this setting every time you turn on
the system. To find your current country setting, issue the command
ati9
and press ENTER. The response will indicate your current country setting (Canada,
Japan, or North America).