ActionTec 56K Internal PC Modem, Руководство пользователя

Страница: 29 / 57

29
Step 5 Remove the Installation CD-ROM from the CD-ROM drive..
Step 6 Click the OS/2 command prompt button on the OS/2 screen. At the com-
mand prompt type:
e CONFIG.SYS
press ENTER.
Step 7 You will need to modify your CONFIG.SYS file. Find the entry for
COM.SYS
(It should be just after the KEYBOARD.DCP statement and
before the VIOTBL.DCP statement. If it is not, arrange the order of the
statements so that this is the case.) If there is no COM.SYS or VCOM.SYS
statement, add these to your CONFIG.SYS file (see the example for the
proper syntax). Be sure these statements are between the KEYBOARD.DCP
and VIOTBL.DCP entries.
Modify the COM.SYS statement using the values you recorded in Step 4:
DEVICE=C:\OS2\BOOT\COM.SYS
(x,yyyy,n)
DEVICE=C:\OS2\MDOS\VCOM.SYS
Where: x is either 1, 2, 3, or 4 (COM4 is recommended)
yyyy is the I/O Port Address ( in Hexadecimal) of the modem
n is the IRQ number of the modem
Example:
DEVICE=C:\OS2\BOOT\COM.SYS (4,F400,11)
DEVICE=C:\OS2\MDOS\VCOM.SYS
Step 8 Save the new CONFIG.SYS file. Check that the installation diskette has
been removed from the floppy disk drive and then reboot the system.
Step 9 You will now be able to use your communications programs at the COM
Port you assigned in Step 7.