Attaching the Assault Course & Swing Beam:
you will need 2 bags of Post-Crete (already mentioned earlier) for concreting the bottom of the
swing beam supports and the Assault Course supports. You may find it easier to attach the swing
hooks while the beam is still on the ground rather than struggling up a ladder. Please note only fit 4
swing hooks. You will need to refer to the Assault Course instructions as well to ensure the supports
are the correct way round and the right measurement in from the end.
You are now ready to construct the swing beam and supports. Dig the holes for the supports using
the dimensions on the following page. The holes will need to be approximately 30cm square and
30cm deep. Take a 5cm slice of lawn and put to one side for return later. Pile your soil onto a piece
of plastic to minimise clearing up afterwards.
