15
S002035-3 Verao 427cm (14ft) Trampoline
Assembly Instructions (cont)
Step 5
Attach 1 x Safety Instruction Placard (7) to the trampoline frame in a position that is easily visible. Thread
the included cable tie through the hole in the Safety Instruction Placard (7) and wrap it around the frame.
Lay the Frame Pad (2) over the trampoline so that the springs and frame are completely covered. Please
ensure that the small gaps in the Frame Pad (2) are aligned with the T-Joints (9) so the top of the T-Joints
(9) fit through the gap.
PLEASE NOTE
: This image shows a four leg trampoline and is for reference only. The trampoline that
you have received has 6 legs.
To secure the Frame Pad (2) to the trampoline, take the hook attached to the base of the Frame Pad (2)
and clip this to a v-ring that is two or three springs to the left of the strap.
WARNING: Do not position your face close to the strap as if you let go it can rebound at high speed causing
injury.
Repeat this for all hooks on the Frame Pad (2). There should be a few remaining pairs of straps on the
Frame Pad (2), take each pair and wrap each side around the outside of the stitched material holding the
v-rings to the Mat (1). Tie a knot using a pair of the straps under the v-ring to finish securing the Frame
Pad (2) in place.
2
7
