11
S002035-3 Verao 427cm (14ft) Trampoline
4
3
9
5
Assembly Instructions
Step 1
Lay out the frame parts (Top Rail (3),
Leg Extension (5) & Leg Base (4)) on
a clear, dry level surface. The 12 x Top
Rails (3) should form a circle, the 12 x
Leg Extensions (5) and 6 x Leg Bases (4)
should sit inside the circle made by the
Top Rails.
Take out the 12 x T-Joints (9) and place
these in between each Top Rail (3). Next
begin assembling the frame by placing
the Top Rails (3) into the T-Joints (9).
NOTE: The t-joint should have the
smaller tube facing upwards. The top
rails should also have the grooves in
the frame facing upwards
.
To assemble this trampoline all you will need is the spring hook that is provided within the carton. During
periods of non-use, the trampoline can be disassembled and stored.
Prior to assembling this trampoline, remove all parts from the carton and check to ensure that all parts
listed in the Parts List on page 10 are present. If you’re missing any of the parts, please call our National
Service Centre to have replacement parts sent out prior to beginning assembly (details can be found in
the warranty pages at the end of this manual).
NOTE:
It is recommended that 2 adults assemble this trampoline.
9
3
