11
10
Data Management
Data Management
Recall the Records
The most recent record (1) is shown first. Each new measurement
is assigned to the first (1) record. All other records are pushed back
one digit (e.g., 2 becomes 3, and so on), and the last record (60) is
dropped from the list.
CAUTION
2.Press “Query” button again to rotate the
records. Up to 60 records will be stored
under each user ID.
The order of the record, date and time
will be displayed alternatively.
1.When the monitor is OFF, press “Query”
button to retrieve the memory. The monitor
will display the average value of last three
measurements.
3.Press another user button to switch
to display another user’s
measurement data.
5.Press the corresponding User ID button to turn off the monitor. Otherwise, the
monitor will shut off within 1 minute after last operation.
4.When User 2 has no record, the
LCD will display just like the picture
on the right.
Delete the Records
1.When under data enquiry mode, press
and hold “Query” button for 3 seconds to
clear memory. The LCD will display the
blinking “dEL ALL”.
2.Press “Query” button to confirm deletion
from memory. The LCD will display “dEL
dOnE” indicates that the deletion is
complete, and then turn off.
Data Transmission
1.With the device successfully paired-up with your iPhone, the measurement data
will be automatically transmitted to your mobile via Bluetooth.
2.The symbol will disappear after successful data transmission, and you may
check your personal health data stored in your mobile device.
3.If the data transmission fails, the symbol will remain. The pending
measurement data will be transmitted to your iPhone when next measurement is
complete.
Interference may occur in the vicinity of equipment marked with the following
symbol and the monitor may interfere with electrical equipment.
To enable the data transmission function, this product should be paired to a
Bluetooth end at 2.4 GHz.
CAUTION
How to mitigate possible interference?
1.The range between the monitor and the Bluetooth end should be reasonably close,
from 1 metre to 10 metres. Please ensure no obstacles between the monitor and the
Bluetooth end so as to obtain quality connection.
2.To avoid interference, other electronic devices (particularly those with Bluetooth
transmission / Transmitter) should be kept at least 1 metre away from the monitor.
