9
8
Start Measurement
Apply the Cuff
2.As pictured on the right, wear the
cuff on your upper arm.
1.Insert the plug of cuff’s air pipe into
the interface located on the right side
of the monitor.
3.Tighten the cuff up. Make sure the
cuff is fixed 2 to 3 centimeters
above your elbow.
You should still be able to insert
one finger when the cuff is
tightened around your upper arm.
4.Correct Posture:
Take measurement on a bare arm only (no
clothing between the arm and monitor).
Sit comfortably and relaxed on a chair.
The centre of the cuff should remain at the
same level as your heart.
Your legs should be relaxed with feet
falling outwards. Palms up.
Start Measurement
Start the Measurement
1.LCD display
Tips:
3.Inflating and measuring.
5.
2.Adjust to zero.
Press “User 1” (“User 2”) button to turn off the monitor. Otherwise, the monitor
will shut off within 1 minute after last operation.
4.Display and save the results, and the
data will be transmitted.
A.When you have finished taking a measurement, press another user button to
begin measuring again.
B.Each user can record a maximum of 60 records.
After correctly positioning the cuff, when the monitor is off,
press “User 1” (or “User 2”) button to turn on the monitor,
and it will complete the measurement process.
