ACTii AC3828, Руководство пользователя

Страница: 11 / 15

Method one: After calling and connected to the panel from remote,
press120#
Method two: Send SMS message 1234120#
Syntax:
【
12
】
+
【
0/1
】
+
【
#
】
Restore factory
setting
System restore factory setting
Method one:
After calling and connected to the panel from remote,
press130000#
Method two: Send SMS message1234130000#
Remark :This feature will restore all settings to factory default apart from
the configuration of sensors and remote control.
Syntax:
【
13
】
+
【
0000
】
+
【
#
】
Total System Rese t Disconnect power to the alarm panel, turned off the battery switch alarm
panel, then press and hold the alarm panel of SET button while power-on.
The system will respond with long “beep” for 5 seconds, then can release
SET button. The system is now totally reset. All configuration has been
cleared, all sensors and remote controlled are deleted and password is
restored to original 1234.
Syntax:
Press and hold the
SETand power on.
Note: Other than the SMS commands for assigning specific phone number for certain zone,
alarm panel will respond to all other SMS commands by replying confirmation of setting by
SMS.
4.2 Commands of System Enquiries
The following instructions are only for SMS command to control panel remotely:
Remote SMS disarm Send SMS message 12340# into alarm panel
Note: 1234 is the password
0#
Remote SMS NORMAL
arm Send SMS messages 12341# to set the alarm panel to ARM
1#
Remote SMS STAY arm Send SMS message 12342# to set alarm panel to STAY ARM.
2#
Remote SMS turn on
relay Send SMS message 12343# to turn on the relay of the alarm panel
3#
Remote SMS turn off
relay Send SMS messages 12344# to turn off the relay of the alarm panel
4#
Query the AC power
status Send SMS messages 12346# to the alarm panel, the alarm panel replies
AC power ON or AC power OFF.
6#
Query the alarm panel
general settings Query the alarm panel status included: arm/disarm, relay status, status
of integrated alarm, status of SMS messaging, status of remote