Actidata actiLib Autoloader 4U, Руководство пользователя и сервисное руководство

Страница: 36 / 103

actiLib Library 4U
– User and Service Guide
Page 36 of 103
7.5 Input Modes
There are several modes to enter values in the different menu items. These values are: selectable
predefined values, toggle values (e.g. On/Off) and numerical values such as network addresses.
7.5.1 Selectable predefined values
After navigating to the menu item the various predefined values can be selected with the “NEXT” and
“PREVIOUS” button. As soon as the display shows the correct value it may be confirmed by pressing
the “ENTER” button.
7.5.2 Toggle values
Toggle values are used to switch between two different states like On and Off . After navigating to the
menu item the display shows the actual
state. Pressing the “ENTER” button will toggle to the possible
new state. Pressing “ENTER” a second time will take over this new state.
7.5.3 Numerical values
Numerical values are needed for network addresses, PIN entries, and other configuration entries.
After navigating to the menu item to be changed, the actual value will be displayed and the cursor
stays on the first digit. The value may be incremented / decremented with the “NEXT” and
“PREVIOUS” button. After pressing the “ENTER” button the cursor is set to the next editable digit. It
can be changed in the same way. After pressing the “ENTER” button at the last digit the complete
entry will be stored. Pressing the “CANCEL” button will cancel the whole edit process and the old
value is valid again.
7.6 Power ON/OFF
Part of the operator control panel is the Power On/Off button. Pressing this button will initiate a
controlled Power Down of the unit (soft landing). The following operations will take place before the
unit shuts down completely:

The display indicates with an appropriate message that the shutdown is in progress

The library controller finishes all ongoing loader and drive activities

The robotics is moved to its home position
 The library controller switches off the power supply’s secondary side

To abort the shutdown process the user has to press Cancel within the first 3 seconds
INFORMATION
The shutdown process may be aborted by pressing
Cancel within the first 3 seconds.