ACT ACTENTRY V-IP, Инструкция по эксплуатации и установке

Страница: 23 / 30

ACTentry V-IP Operating and Installation Manual
Page 22
5.0 SETTING A FIXED IP ADDRESS
By default the V-IP unit is supplied with support for DHCP server only. The IP
address is assigned by the server when the device powers up. In some
circumstances it might be necessary to fix the IP address of the V-IP unit.
The appli
cation „Telnet‟ is used to configure a fixed IP address. (Note: Telnet
is not available on Vista machines).
If the V-IP unit already has a known IP address, then to change it to a fixed
address, do the following:
1. Type cmd, to run the DOS command window.
2. telnet
IP ADDRESS of V-IP Unit e.g. telnet 172.27.72.85
3. When prompted for the password, enter ACT
4. Type ? to get a list of commands
5. To set the ip address enter:
setip
ip address gateway subnetmask
Eg. setip
172.27.72.63 172.27.72.254 255.255.255.0
6. IP address is now set to 172.27.72.63
7. Type quit to exit.