ACT ACTENTRY V-IP, Инструкция по эксплуатации и установке

Страница: 22 / 30

ACTentry V-IP Operating and Installation Manual
Page 21
4.5
Video picture is poor quality or grainy
The bandwidth can be increased. Go to Settings in the ACTentry V-IP
application and select bandwidth of 1024Kb/s.
Also check the video signal and 0V are on the same twisted pair.
4.6
Call Button not making call when pressed

Check the V-IP plays a sound when call button pressed. If not check
the call button wiring. One call button wire should connect to the CALL
input on the ACTentry V-IP unit. The other connection on the call
button is connected to 0V.
4.7 The
“Allow Access” option does not open the door

Check the wiring between the Lock Relay terminals on the ACTentry V-
IP unit and the lock

Use a multi-meter to check that the Lock Relay on the ACTentry V-IP is
switching over.
4.8 Alarm is constantly on

Check the Tamper spring on the ACTentry V-IP unit is fitted and not
impeded by wiring.

Ensure the Door Contact (DC) input on the ACTentry V-IP unit is linked
to 0V.

Power down and power up the ACTentry V-IP unit again.