Rev A
（
ACT-VCC-2000-AC)
8
3.
Packaging and Shipping
•
The Air Conditioner should be packaged in a wooden crate, as in figure 4.1 (1 pcs/box or 6 pcs/box), with
foam protection surrounding the unit.
•
When transporting this Air Conditioner, please pay attention to the following:
Figure 3.1 Packaging marking
•
During Handling or transport, the Air Conditioner must be upright. Do not place flat or tilted.
•
The Air Conditioner is a precision instrument and should be handled with care. Any secondary shipping must
be capable of protecting the unit from damage.
E08*
Low-temperature warning
E09
AC Power overvoltage warning
E10
AC Power undervoltage warning
E11
Refrigerant circuit pressure is too high warning
E12
Refrigerant circuit pressure is too low warning
E13*
Heater current overload warning
E14*
Heater current too low warning
E15
Return air temperature sensor fail warning
E16
Condenser air temperature sensor fail warning
E17
Ambient air temperature sensor fail warning
E18
Control signal input: on / off dry-switch type
E21*
AC voltage too high warning
E22*
AC voltage too low warning
E23*
Compressor Current Overload warning
E24*
Compressor Current Underload warning
E25
Communication Loss warning for master/slave pairs
E26
Evaporator
temperature sensor fail alarm
E27
Evaporator freeze-up
alarm
E31
Refrigerant leakage alarm
Note:
Gray
text items are not applicable for all products. *May vary with optional heater addition