Product
Name
Version
Doc No
Date
Page
S76S/S78S SDK Manual
C
May 3, 2017
17 of 33
After finishing KEIL installation, open an AcSiP’s SDK project named
“
Ping-Pong-L0.uvprojx
” in this path “\Keil\AcsipNode\ping-pong\” by
launching uVision5 and looks similar to the picture below (see Figure 3.13).
Figure 3.13
Over the position “
Ping-Pong-L0
” and press right button of you mouse.
Click “
Options for Target”
on the toolbar and select the
Debug
tab.
Verify that the correct debug adapter of the XB board –
ULINK2/ME
Cortex Debugger
, is selected as Figure 3.14.
Figure 3.14
After selecting ST-Link Debugger, click “
Setting
” button and then will
see the “Debug” tab, if ULINK2 “Serial No.” is seen and SWDIO in SW
Device is shown, the connection is fine (See Figure 3.15).
Go to “
Flash Download
” tab. In “
Programming Algorithm
”, please
add a “
STM32L0 192kB Flash
” in the dialog just like the below Figure
3.16.
