Product
Name
Version
Doc No
Date
Page
S76S/S78S SDK Manual
C
May 3, 2017
16 of 33
Figure 3.9
Connect HW component as Figure 3.9.
Connect EK-S76SXB/EK-S78SXB board to ULINK2.
ULINK2 JTAG SWDIO Pin7 <==>
SWDIO
on XB board (See
Figure 3.12)
ULINK2 JTAG SWCLK Pin9 <==>
SWCLK
on XB board
ULINK2 JTAG RESET Pin15 <==>
RST
on XB board
ULINK2 JTAG GND Pin12 <==>
GND
on XB board
ULINK2 JTAG VCC Pin1 <==>
3.3V
on XB board
Figure 3.10 Figure 3.11 Figure 3.12
Connect ULINK2 to PC with USB standard A to mini-B cable. (See
Figure 3.9)
Connect XB board to PC/NB USB port with USB standard A to micro-B
cable. (See Figure 3.9)
3.4.2 Software Preparation
Please follow chapter 4.1 to complete KEIL installation first.
3.5 Connection & Disconnection via ULINK2
3.5.1 Setup debugger as ULINK2
