manualshive.com logo in svg

ACS CFSound-III, Руководство пользователя

Поделиться
Скачать
ACS CFSound-III Скачать руководство пользователя страница 20

Compact FLASH III Digital Audio System 

Copyright©1992-2010 by ACS, Sarasota, Florida 

20 

ALL RIGHTS RESERVED 

 

[Section] / Parameter 

Description 

played once whenever the 
SequenceContactNumber activates one time. 

Default=FALSE (no autoplay) 

LineInputEnableContactNumber=dd 

Sets the number of the contact that will 
stop any sound currently playing and enable 
the Line level Input to the decimal value 
dd. Audio on the Line level Input is 
amplified to the current volume setting and 
appears on the speaker and Line level 
Output. 

Default=0 (no Line In control contact) 

PttOutputWithLineInputContact 
=TRUE/FALSE 

Setting this value to TRUE will cause the 
PTT relay to follow the non-zero 
LineInputEnableContactNumber state, 
otherwise the PTT relay activation is 
controlled by sounds with the Relay 
attribute in their filename. 

Default=FALSE (PTT for sounds w/Relay attr) 

[LineIn] 

LineIn Section 

LineInputAlwaysEnabled=TRUE/FALSE 

Setting this value to TRUE enables the Line 
level Input always when no sound is 
playing. When this is FALSE, the Line level 
Input is controlled by the 
LineInputEnableContactNumber. 

Default=FALSE (Line level Input disabled) 

[DMX] 

DMX Section 

IsMaster=TRUE/FALSE 

Setting this value to TRUE enables the 
CFSound as a DMX controller. When this is 
FALSE, the CFSound is a DMX device. 

Default=FALSE (DMX device) 

SlaveBaseChannel=ddd 

Sets the base channel number for the group 
of channels that the CFSound monitors when 
configured as a DMX device 
(IsMaster=FALSE). 

Default=1 

FrameDelay=dd 

Sets the delay times 20mSEC between 
transmitted DMX frames. 

Default=0 (no delay) 

NumberOfChannels=ddd 

Sets the number of transmitted channels per 
DMX frame, always a multiple of 2. 

Default=512 

BeginFadeValue=ddd 

Sets the DMX channel value for the start of 
the Fade Up when the associated sound 
plays, and the value for the end of the 
Fade Down when the sound ends. 

Default=0 

EndFadeValue=ddd 

Sets the DMX channel value for the end of 
the Fade Up when the associated sound 
plays, and the value for the start of the 
Fade Down when the associated sound ends. 

Default=255 

FadeDuration=dd 

Sets the length of the DMX channel Fade Up 
/ Fade Down when the associated sound 
plays, 0 = full on/off. 

Default=1 

[Video] 

Video Section 

DisplayMode=d 

Sets the Video Graphics Adaptor display 
mode. Default=0 

 

Содержание CFSound-III




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды