ACS ACR38x, Справочное руководство

Страница: 15 / 20

Document Title Here
Document Title Here
Document Title Here
ACR38x Reference Manual (CCID)
Version 6.02
Page 15 of 20
info@acs.com.hk
www.acs.com.hk
Protocol Data Structure for Protocol T=1 (dwLength=00000007h)
Offset Field Size Value Description
10 bmFindexDindex 1
B7-4 – FI – Index into the table 7 in ISO/IEC
7816-3:1997 selecting a clock rate conversion
factor
B3-0 – DI - Index into the table 8 in
ISO/IEC 7816-3:1997 selecting a baud rate
conversion factor
11 BmTCCKST1 1
B7-2 –
000100b
B0 – Checksum type (b0=0 for LRC, b0=1 for
CRC)
B1 – Convention used (b1=0 for direct, b1=1 for
inverse) Note: The CCID ignores this bit.
12 BGuardTimeT1 1
Extra Guardtime (0 to 254 etu between two
characters). If value is FFh , then guardtime is
reduced by 1 etu.
13 BwaitingIntegerT1 1
B7-4 = BWI values 0-9 valid
B3-0 = CWI values 0 - Fh valid
14 bClockStop 1
ICC Clock Stop Support
00h = Stopping the Clock is not allowed
01h = Stop with Clock signal Low
02h = Stop with Clock signal High
03h
= Stop with Clock either High or Low
15 bIFSC 1 Size of negotiated IFSC
16 bNadValue 1
00h
Only support NAD = 00h
The response to this message is the RDR_to_PC_Parameters message.