background image

Document Title Here 

Document Title Here 

 

Document Title Here

 

ACR33U-A1 SmartDuo Reference Manual 

Version 1.00

 

Page 5 of 56

 

 

 

[email protected] 

www.acs.com.hk 

3.0. Smart Card Support 

3.1.  MCU Cards 

The ACR33U-A1 SmartDuo Smart Card Reader is a PC/SC compliant smart card reader that 
supports ISO7816 Class A (5 V) smart card. It also works  with MCU cards following either the T=0 
and T=1 protocol. 

3.2.  Memory-based Smart Cards 

The ACR33U-A1 SmartDuo Smart Card Reader works with several memory-based smart cards such 
as: 

 

Cards following the I2Cbus protocol (free memory cards) with maximum 128 bytes page with 
capability, including: 

Atmel: AT24C01/02/04/08/16/32/64/128/256/512/1024 

 

Cards with secure memory IC with password and authentication, including: 

 

 

Atmel: AT88SC153 and AT88SC1608 

 

Cards with intelligent 1k bytes EEPROM with write-protect function, including: 

 

 

Infineon: SLE4418, SLE4428, SLE5518 and SLE5528 

 

Cards with intelligent 256 bytes EEPROM with write-protect function, including: 

 

 

Infineon: SLE4432, SLE4442, SLE5532 and SLE5542 

 

Cards with ‘104’ type EEPROM non-reloadable token counter cards, including: 

 

 

Infineon: SLE4406, SLE4436, SLE5536 and SLE6636 

 

Cards with Security Logic with Application Zone(s), including: 

 

 

Atmel: AT88SC101, AT88SC102 and AT88SC1003 

 

Содержание ACR33U-A1 Smart Duo

























































Отзывы: