ACS A1270 EMAT, Руководство по эксплуатации

Страница: 15 / 60

А1270 Electro-Magnetic Ultrasonic Thickness Gauge
Operation Manual
15
ACOUSTIC
CONTROL
SYSTEMS
Accumulator
charge level
Strobe
Scanning end
1.3.5 Keypad
The keypad (Figure 11) has 11 functional keys and the On/Off key.
Main functions of the keys:
- Key
(ON / OFF) is used to switch On/Off the instrument.
ATTENTION:
IF NO KEY IS PRESSED AND NO MEASURMENT IS PERFORMED WITHIN 10 MINUTES THE INSTRUMENT
WILL BE AUTOMATICALLY SWITCHED OFF.
ATTENTION:
IN 2 MINUTES THE DISPLAY BRIGHTNESS WILL AUTOMATICALLY BE SET TO THE MINIMAL LEVEL – 5%,
IF NO KEY IS PRESSED AND NO MEASUREMENT IS PERFORMED!
- The functional keys (F) perform various functions depending on the selected operation mode of the instru-
ment. The name of the current function is displayed under each key. The number of the functional keys is as follows, from
left to right: F1. F2, F3 (Figure 12).
- The key switches between the measurement modes and the SETUP mode and back.
- The key (ENTER) can perform various functions depending on the operation mode and state of the thickness gauge.
- The / , / and / keys are used to select and edit the active parameters. Their
functions are similar for various operation modes and are self-explanatory as their icons correspond to their functions.
Figure 11
Figure 12
F1 F1 F1