ACS A1040 MIRA, Руководство по эксплуатации

Страница: 95 / 99

95
A1040 MIRA 3D © 2021 Acoustic Control Systems – ACS Group
File format
File format
28 File format
The file format of A1040 MIRA 3D and A1040 MIRA 3D PRO is open for any user. This
chapter describes user parameters, reading procedures and saving principles.
28.1 File list
The application saves the data relevant to the measurement in several files placed in
the folder named by the user during the save procedure. For different measurement
modes the file structure differs.
File/F
older Description
report
ing The folder contains all files and configurations which are relevant to the
report. Find the report in
report.pdf
file.
config
.m3d main configuration file in JSON format
param
s.txt b-scan parameters in ASCII format
raw_d
ata.bi
n binary file with raw measured data
saft_d
ata.bi
n binary files with reconstructed data
vel_da
ta.bin This is a binary file with raw velocity data. The application uses this data
to estimate the sound velocity.
File params.txt
The application exports the relevant parameters in human-readable ASCII format into a
params.txt
file . Refer to the following table for a detailed description.
Parameter Description
version : 1.1 The file format may evolve with time. Read the
version
first. Then adjust your reading routine for
that parameter.
analog gain [dB] : 10 refer to page
operating frequency [kHz]
: 50 refer to page
period count : 1.0 refer to page
tgc [dB/mus] : 0.00 refer to page
47
47
47
47