ACS A1040 MIRA, Руководство по эксплуатации

Страница: 32 / 99

32
A1040 MIRA 3D © 2021 Acoustic Control Systems – ACS Group
Safety
Safety
12 Safety
The general safety instructions listed in this section are relate to the use of the
device on workshops and constructions sites under controlled conditions.
These general safety instructions are no replacement for a risk assessment of the
workplace according to BetrSichV §3, GefStoffV §6 and ArbSchG §5 and applicable
additional national and international requirements by a health and safety officer or
a specialist for occupational safety of the employer.
General safety instructions:
·
The equipment should not be handed over to persons not aware of inherent
risks of the device use or not knowing the content of this manual.
·
Be sure to stand securely when measuring with the device.
·
Keep a good posture during the handling of the device and avoid movements
that will overloading your joints, ligaments and muscles.
·
Pay attention to your environment and potential hazards during the
measurement.
·
Always mechanically secure the device from falling when used in elevated
positions or areas.
The Device contains four Class 2M laser for positioning purposes. The Laser are
located at the bottom of the device.