ATR480 Time Recorder
|
User’s Manual
3
Setting the Time Recorder
The switches inside the clock have the following functions:
Run
<->
Prog
Run - Normal Use
Prog – Program Mode (to change settings)
Reset
Restart Clock
To enter programming mode, open the front cover and move the switch found under the
function keys from ‘Run‘ to ‘Prog’. Navigate through the different programming modes by
pressing the ‘Mode’ button and enter them by pressing ‘Enter’. The setting code will be reflected
on the lower left of the screen and will move in increments when changes have been done
Note: If a password has been set on the clock, a “– – – –“ prompt will appear when
entering Program Mode. You will need to enter your password to access the clock
menus. If you misplace your password you will need to contact Acroprint at
(800) 334-7190 for assistance to reset your password.
Time & Date Settings (Mode ES00)
To change the time and date of the clock, enter ES00 mode to begin. Press ‘ Enter ’ when
‘ ES00 ’ appears on the screen when entering programming mode.
Code 01: Year
Press ‘ + ‘ or ‘ – ‘ to increase or decrease the year setting
Press ‘ Enter ‘ to confirm the selection
Code 02: Month/Date
Press ‘ + ‘ or ‘ – ‘ to increase or decrease the month setting
Press ‘ Enter ‘ to confirm the selection
Press ‘ + ‘ or ‘ – ‘ to increase or decrease the day setting
Press ‘ Enter ‘ to confirm the selection
Code 03: Time
Press ‘ + ‘ or ‘ – ‘ to increase or decrease the hour setting
Press ‘ Enter ‘ to confirm the selection
Press ‘ + ‘ or ‘ – ‘ to increase or decrease the minute setting
Press ‘ Enter ‘ to confirm the selection
